Ford Explorer Rear End Codes

Identifying ford vehicles equipped with oe traction rear ends. #3 the 7.5 rear axle height is shorter than the width and the shape appears oval.

Ford Ranger V-8 Engine Swap Ford Ranger Ranger Ford

Would have grabbed the whole thing but it was an open diff.

Ford explorer rear end codes. 01 toyota corolla, emission code p0420 '99 ford explorer , rear axle noise. If you look at the explorer 8.8 rear axle, you will notice the driver’s side axle tube is longer than the passenger side. The most common gearing for rear differential in ford explorer suvs includes the following:

The code appears as a number or letter/number. The explorer 8.8 is narrowed by cutting out 2.875 inches from the driver’s side axle tube, welding it back together, and installing a separate passenger side axle in the now shortened driver’s side axle tube. Ford f250sd, f350sd pickup ‘99:

Where is the fill port on a 2004 ford explorer rear end. This is your door codes for a limited slip rear. Hello, i have a 1999 ford explorer xlt 4 door, 4wd.

Here is where the codes are found on the axle tag: Every ford car has a unique identifier code called a vin. This actually offsets the differential “pumpkin” to the passenger side.

The axle code was r7 (4.10 ls) just like the trucks with a 28 spline clutch pack driven limited slip. For instance, if someone wants to buy a car, it is possible to check the vin number one the online. The factory made rear end assembly did include abs on each side of the unit.

Locate the safety compliance certification label on the driver's side front or rear door panel. Use this chart to find the axle ratio that corresponds to that code: This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more.

The 8.8 rear axle dimensions are equal and the shape appears round. On the ford explorer 8.8 rear. Code.d1 limited slip 3:27 ratio code.d2 ls 4:10 code.d4 ls 3:73 code.d5 ls 3:55 code.l73 ls 3:73 these rears are found on mid 90's to late 90's explorer hope this helps

The axle code on the sticker in the door jamb says 45 for the axle code. Rear axle codes can be found on the safety standard certification label attached to the left drivers side door lock post. Code application ring gear and pinion nl or l axle shaft splines additional information;

If planning to narrow it, pull the cover and the long/driver side axle and grab a short pass side axle from another and stuff it in there before u check out. Visit the rv & trailer towing guides page on the ford fleet website. Mine was $150.oo the above axle will be going into a street and strip truck with a 351w.

These types of set ups were not limited to the 4×4 or awd models. This will tell you what you have my friend,good luck Door lock facing or the door latch post pillar).

Find the word axle under the bar code. The tags were replaced with adhesive labels that are placed around the axle tube near the brake and wheel end. Does any one know which code 45 really is?

In my case, on my 1995 ford explorer , it shows that my axle code is d 4 and i know that i have a 3.73 limited slip axle with my trailer towing package. 3.08 3.27 3.55 3.73 4.10. Back in 1995, the only explorers that had 4.

For context, i was coming from the stock 8 inch, 2.80 gear open diff axle with drum brakes. In a regular scenario, you might need to swap more than just the ring and pinion. If you see d2 in that spot on the tag, don't let it get away!